• +(91)-(22)-23877877
  • kalpanapolymers@yahoo.in

INDOFIL ESVS Pigment Printing Binder


Features :
  • ESVS is free from
  • Formaldehyde
  • NPEO/OPEO free
Properties :
  • Appearance Milky white liquid
  • pH (as packed) 6 to 8
Catalyst :

Since ESVS is a self cross linking acrylic emulsion, catalyst is not necessary to achieve film durability where
curing conditions are optimum (3 minutes at 150 Deg.C) But where curing conditions are less than optimum an acid
or latent acid catalyst is recommended. The use of catalysts like Di-ammonium phosphate is recommended.

Pigment Printing with water base system :
  • ESVS: 12 to 15 parts
  • KST: 1.5 to 1.6 parts
  • Water: 83 to 80 parts
  • Total: 100 parts
  • Neutralized to pH 8.5 to 9 with ammonia.
  • Fixer PF/LF/FF: 03 parts
  • Fixer is added just before printing.
  • Binder dosages will be depending on the % shade of pigment.
Note :

The neutralization should be done only after the addition of catalyst. Little excess of Ammonia would not in any way
harm the print paste. Print paste should be filtered well before it is taken for printing.

Additional Information :
  • Minimum Order Quantity: 200 Kilogram

@ 2016 Kalpana Polymers Pvt. Ltd. All Rights Reserved.

Designed and Developed by Webtech Media Synergy Pvt Ltd.