• +(91)-(22)-23877877
  • kalpanapolymers@yahoo.in


We are offering Construction Chemicals.

Technical Data :
  • Color: White
  • Type: Single component, pure acrylic polymer
  • Consistency: Paste like (water thinnable)
  • Touch Dry: Approx 30 mins @ 30°C & 50%
  • Cure time: 48 hours @ 30°C& 50% RH
  • Cured coating: Elastic & Flexible
  • Temperature resistance : Approx – 20°C to + 100°C
  • Shore A hardness: Approx. 30
  • Elongation of break: 200% (ASTM D 2370
  • Shrinkage after cure : Nil
  • Water Tightness: Excellent
  • Chemical resistance: Good
  • Sealer coat: 130 to 180 Sq Ft. depending on Substrate condition
  • I st coat 70 to 80Sq. Ft. per kg.
  • 2nd coat 80 to 90Sq. Ft. per kg.
Properties :
  • Forms flexible, elastic and water tight coating.
  • Allows cement mortar/concrete to breathe.
  • Excellent bonding to most building material.
  • Accommodate substrate thermal movements without
    cracking or peeling of the coating.
  • Suitable for application on slightly damp surface.
Primary Uses :
  • For waterproofing of new surface as well as for old
    repaired surface.
  • Waterproofing of roof slabs, terraces, balconies etc.
  • Excellent for application on structure having complicated
    geometry like arches, domes, etc.
  • Suitable for horizontal as well as vertical surface like
    facades, exterior RCC structure, etc.
Direction of Uses :
  • The surface to be coated must be sound, clean, and free
    from oil,grease, dust or any other contaminations. Cracks of > 2 mm should be filled properly.
  • For better adhesion of Flexcoat-WP to the masonry
    surface a sealer coat has to be applied.
  • For sealer coat Flexcoat-WP to be diluted I : I part by
  • In case of new construction, concrete/masonry should be allowed
    to cure for a minimum of 7 days and preferably 28 days before application of Indofil Flexcoat-WP.
  • Wash thoroughly to remove all loose dirt from the surface
    and allow the surface to dry.
  • Apply sealer coat and allow to dry for 6 to 8 hours
    before application of Flexcoat-WP.
  • Flexcoat-WP can be applied by brush, roller or airbrush
  • Flexcoat-WP is to be diluted with 10 to 15% potable
    water before application.
Safety Precaution :
  • Flexcoat-WP is water based and non-hazardous. However, it should
    not be swallowed or allowed to come in contact with skin and eyes.
Storage Stability :
  • One year if stored properly, placed in cool and
    dry place in shed.

@ 2016 Kalpana Polymers Pvt. Ltd. All Rights Reserved.

Designed and Developed by Webtech Media Synergy Pvt Ltd.